Model GX2017-U Instructions. These instructions are meant as an Easy Guide supplement to the manufacturers Instructions included with the Watch.  The Instructions are to help you started understanding the operation of the watch. As you gain experience, you will make more sense of the Manufacturers Instructions.

The operation of the watch is simple once you know How. Please take a little time to understand the operation. There is a test Recording and some Music already on the Watch. We normally load the watch with 10-15 Easy Listening Songs for your Enjoyment.

SECTION ONE

Watch Modes  

Please read and understand how to switch between the various modes on the watch. (Music Mode MP-3 Player Green Light on steady.)    ( Voice Record Mode, Small Yellow Light ON Steady.)

Turn on the watch by holding down the Play button for about 2 seconds. Three lights will flash 3 times at the same time , then the Green Light will stay on.  (This is the Music MP-3 Player stand by mode)

Now quickly press the REW/VOL- Button.  You will notice that the Yellow Light has come ON. (This is the Record Stand By Mode)

If you press the REW/VOL- Button again you will be taken back to the MP-3 Player Stand By Mode. (Green Light on Steady)

To Play the Music Stored in the watch memory, quickly Press the Play Button. The Green Light will start to Blink and your Music will start to play. To increase the Volume Hold Down the VOL+ Button until the correct volume is set. To decrease the Volume, Hold down the VOL- Button until the correct volume is reached.

To skip Forward through the songs Quickly Press the FF/Vol+ Button

To Skip Backwards through the Songs Quickly Press the REW/VOL- Button.

To Turn off the Music, Quickly Press the Play button.

To Turn off the watch Hold Down the Play Button until the Red Lights Flash then release the button.

________________________________________________________________________________

To Record

To make High Quality Recordings make sure the cover for the Earphone is OPEN. (Do not insert the Earphone until you want to Listen to your recordings)

Turn on the watch and go to the Record Standby Mode as in Section One. (Yellow Light Steady).

When you want to start recording, Press the EQ Button quickly. The Yellow Lights will Blink, while the recording is being made. To stop recording Press the EQ Button again. To Start another recording press the EQ Button again and then press the EQ Button to stop the Recording.

To Listen to your Recording, Plug in the Earphones then quickly Press the play Button. (Green Light starts to Blink) You can skip to another recording by pressing the VOL+ Button.

When you haven Listened to the Recording Press the Play Button again. The recording playback stops and the Green Lights Blinks. To Return to the Record Mode Hold Down the Play Button until the Yellow Light comes on. You can now make another recording by Pressing the EQ Button . If you do not want to make another Recording Press the VOL- Button to return to the Music Stand By Mode.

To Download your Recordings to your Computer.

Connect the watch to your computer using the USB cable. Click on Computer to bring up a window. Select the location of your watch. Open the Audio Folder on the Watch.  Then bring up another window this time select the location that you want to store your recordings. Then just drag and drop the recordings to your computer.

Loading Music to the Watch

You can download your Music to the watch by plugging the USB cable (supplied with the watch) into your computers USB port and the other end into the watch. Double Click on “Computer” and bring up your computer File window.  Do this twice, so you have two windows open.  Select the USB watch with one of the windows and the location of your music with the other window. Now just drag and drop your music from your computer into the watch. The watch is capable of holding over 250 songs. If you also want to store recordings on the watch, then leave enough storage memory for this purpose by cutting down on the number of songs you store in the watch memory.